Home            Contact us            FAQs
    
      Journal Home      |      Aim & Scope     |     Author(s) Information      |      Editorial Board      |      MSP Download Statistics

     Advance Journal of Food Science and Technology


Effect of the Spray Drying Process on the Quality of Coconut Powder Fortified with Calcium and Vitamins C, D3 and E

1, 2Lucas Aguirre Juan Carlos, 2Giraldo Giraldo German Antonio and 1Cortes Rodriguez Misael
1Universidad Nacional de Colombia, -Sede Medellin. Calle 59 A N 63-20, Medellin
2Universidad del Quindio, Carrera 15 Calle 12 Norte, Armenia-Colombia
Advance Journal of Food Science and Technology  2018  SPL:102-124
http://dx.doi.org/10.19026/ajfst.16.5943  |  © The Author(s) 2018
Received: September 14, 2017  |  Accepted: January 18, 2018  |  Published: November 10, 2018

Abstract

The objective of this study was to optimize the process of Spray Drying (SD) for the obtaining of coconut powder fortified with Physiologically Active Compounds (PAC), according to the dryer's operating characteristics and the product, being (SD) is one of the most used technologies in the powder industry, guaranteeing good quality attributes for various applications in the food sector; it was used a response surface design based on five independent variables:: Maltodextrin (MD), Inlet Air Temperature (IAT), Outlet Air Temperature (OAT), Atomizing Disk Velocity (ADV) and drying Chamber Vacuum Pressure (VPC) and the dependent variables: yield (*R), Deposit Formation (DF) in the drying chamber, humidity (Xw), water activity (aw), Hygroscopicity (H), Solubility (S), wettability (Hu), color (L*, a* y b*), recovery of PAC (Ca, vitamins C, D3 and E), Peroxide Index (PI) and particle size (D10, D50 y D90). The results were analyzed statistically from the Statgraphics XVI.I software and through analysis of variance with 5% level of significance. In general, response variables were affected by all independent variables. The experimental optimization defined the CP+PAC process conditions as follows: IAT: 170°C; OAT: 85.8°C; ADV: 26676 rpm; VPC: 1.6” H2O; MD: 7.0%; and with quality attributes: Xw: 1.7±0.4%; aw: 0.171±0.018; H: 8.4±0.5%; S: 58.4±2.1%; Hu: 263.0±19.8s; L*: 79.5±0.9; a*: 1.5±0.1; b*: 9.5±0.4; PI: 2.4±1.3 meq H2O2/kg oil; DFC: 32.4±2.3%; *R: 44.0%; D10: 1.70±0.05 μm; D50: 8.46±2.09 μm; D90: 78.18±24.30 μm; Ca: 41.7±2.3%; Vit.C: 32.4±6.2%; Vit.D3: 7.8±1.8%; Vit.E: 6.1±1.9%; making it a hygroscopic product, potentially sensitive to oxidative processes, which can cause changes in color, strange flavors or odors.

Keywords:

Coconut, dehydration, encapsulation, vitamins, yield,


References


Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.

ISSN (Online):  2042-4876
ISSN (Print):   2042-4868
Submit Manuscript
   Information
   Sales & Services
Home   |  Contact us   |  About us   |  Privacy Policy
Copyright © 2024. MAXWELL Scientific Publication Corp., All rights reserved