透過您的圖書館登入
IP:3.141.0.61
  • 期刊

Measurement and Modeling of Elemental Mercury Sorption on Various Activated Carbons in a Fixed-Bed Adsorber

並列摘要


The characteristics of mercury sorption by activated carbon were experimentally measured and theoretically modeled. Experiments were carried out in a fixed-bed mercury sorption facility composed of a mercury permeation tube embedded in an isothermal water bath, a fix-bed adsorber enclosed in a furnace, and an on-line GC for mercury measurements. The proposed sorption model involved the coupling of a kinetic model based on the mechanisms of surface equilibrium and external mass transfer, and a material balance model based on the tank-in-series approach. Three different equilibrium expressions were used in the model, i.e., the Henry's Law, the Langmuir isotherm and the Freundlich isotherm. In additional to kinetic simulations using the developed model, an equilibrium model was also used to simulate the thermodynamically preferred mercury species under the experimental conditions. The experimental results have indicated that the factors affecting the adsorption efficiency include the type of activated carbon, the adsorption temperature, the inlet mercury concentration, and the gas flow rate. The developed kinetic model has been found to describe well both the current experimental results and those reported in the literature.

被引用紀錄


陳柏任(2015)。銅負載二氧化鈦在雙胞反應器進行光催化還原二氧化碳〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2015.02825
Liao, W. T. (2013). 氣泡在液體中上浮運動的理論研究 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2013.00878
Chang, C. Y. (2012). 反應器與電子電漿共振於光觸媒之分析與應用 [doctoral dissertation, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2012.00373
CHang, C. Y. (2007). 旋轉反應器在光觸媒的應用之製程特性與規模放大 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2007.00824
宋斯偉(1998)。萃取液相中重金屬之研究〔碩士論文,元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-0112200611304179

延伸閱讀