- 期刊
- OpenAccess
High Temperature Properties of the Amorphous Fe, 2Cr8B14Si, Alloy
並列摘要
Amorphous Fe72 Cra B14 Si6 ribbons were fabricated by the rapid quench method. Addition of Cr in the Fe-base amorphous material can improve its thermal stability, so we intended to study the high temperature properties of this kind of mateiral. The methods chosen for the studies in this respect include measuring electrical resistivity changes during crystallization both isothermally or nonisothermally, VSM measurements under the same conditions as those used in the electrical resistivity measurements, x-ray analysis after isothermal treatments and DSC studies. All results are discurred in relation to each other.
並列關鍵字
無資料延伸閱讀
- 黃銘鶴（2009）。Wear Properties of Al0.2Co1.5CrFeNb0.1Ni1.5TiV0.1 High-Entropy Alloys〔碩士論文，國立清華大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0016-1111200916072924
- 蔡智全（2018）。Analysis of the Mechanical Properties on Fe-22Ni-10W-9Cr Alloy〔碩士論文，國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/THE.NPUST.ME.015.2018.E06
- 吳財旭（2009）。Study of the Forged Capability of Ti-4.5Al-3Cr-1.8Mo-1V-0.6Fe Alloy〔碩士論文，國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST.2009.00251
- 洪慶安（2020）。Researches of the Mechanical Properties of Fe-15.5Cr-3.5Ni-2.0Cu Alloy〔碩士論文，國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST202000017
- 賴竣暉、王偉仁（2007）。The Effects of Al, Fe, Cr Addition on the Structure and Mechanical Property of Femealloy。鑄造工程學刊，33(3)，19-26。https://doi.org/10.29809/JTFS.200709.0003