透過您的圖書館登入
IP:3.16.70.101
本篇文章尚未正式出版,請點選「加入追蹤」跟進後續出版資訊!若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

並列摘要


A blowout preventer (BOP) gantry crane is an offshore plant that moves a BOP stack located on a drilling platform to a BOP trolley. However, such a plant has yet to be developed in Korea. Because BOP gantry cranes produced overseas are expensive, developing such cranes domestically is imperative. In this study, ANSYS was used to conduct a structural analysis on a BOP gantry crane model to simulate the roll and pitch motions of a drillship that were induced by waves and wind load as well as the weight of the crane. Moreover, Simulation X was used for implementing control-system and subsystem designs and to analyze a hydraulic system.

被引用紀錄


李宗威(2011)。鍛造零件之鍛造變形率對鍛後滲碳熱處理之影響〔碩士論文,國立虎尾科技大學〕。華藝線上圖書館。https://doi.org/10.6827/NFU.2011.00028
林志維(2006)。大面積陣列式氮化鎵發光二極體之研製與分析〔碩士論文,國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-0207200917341301
王俊凱(2007)。高速、高功率串接式可見光發光二極體〔碩士論文,國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-0207200917345669
張鈞至(2009)。自激式冷陰極管螢光燈電子安定器〔碩士論文,崑山科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0025-2009200922011900
林逸旻(2009)。碳化物噴覆處理鋼之磨耗行為〔碩士論文,大同大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0081-3001201315103925

延伸閱讀