- 期刊
前十字韌帶脛骨擴張式內釘設計及生物力學測試
Biomechanical Test for a New Design of Tibial Dilation Nail for Anterior Cruciate Ligament Reconstruction
摘要
前言：近年來由於運動風氣盛行，提高人們對於運動傷害的重視。前十字靭帶重建術是運動傷害手術中常見且重要的手術。決定重建手術成功的關鍵在於是否能有效地固定肌腱靭帶，而臨床上，因鬆脫而導致手術失敗是最需要被解決的問題。目前現有的植入物及治療方式都無法有效地解決上述的問題，因此本研究的目的是設計出一擴張式脛骨內釘以解決這個問題。方法：本研究所設計的擴張式脛骨內釘，製作出實體以模擬手術進行的方式將成品植入豬隻的膝關節，手術模擬過程我們將對照組及實驗組1、3模擬正常植入情形，而實驗組2、4則模擬手術植入時位置有些偏差。 再將其放到材料試驗機上進行力學測試。並以市售產品做為實驗對照組。結果:本研究所設計的擴張式脛骨內釘，在模擬正常植入位置時的破壞模式是因植入靭帶撕裂時，其最大拉出力量的平均值遠大於對照組。在模擬植入位置有偏差其破壞模式為鎖合處靭帶滑脫，其最大拉出力量的平均值與對照組差不多。結論與建議：新設計的擴張式內釘模擬正常植入位置的鎖合強度大於目前常用的Interference螺釘，主要的原因是內釘打入後再利用擴張的內釘逼緊軟組織與骨穴而不會傷害軟組織，因此可以增強鎖合的強度。而比較相同設計的擴張式內釘在正常植入位置與位置有偏差時也證實當植入位置有偏差時，原本應正常擴張的內釘無法發揮其功能，進而降低鎖合的強度。由結果與對照組比較，證實新設計的擴張式內釘的確有較好的鎖合能力，證明臨床使用的可行性。
並列摘要
Purpose: The purpose of this study is to design a dilation nail to improve the fixation strength of autograft tendon for anterior cruciate ligament reconstruction. Methods: Four new design dilation nails were manufactured and were implanted into pig knee joint by simulating anterior cruciate ligament reconstruction surgery. One interference screw was used as a control group, two dilation nails was implanted into proper position and the other two dilation nails was implanted as simulating malposition. The pig knee joint was mounted onto the material testing system and the maximum pull out strength was record to evaluate the fixation strength of the new dilation nail and the interference screw fixation methods. Results: Two new design dilation nails with proper implanted were failure due to autograft ligament torn and their maximum pull out strength were larger than the control group. The other two new design dilation nails with malposition implanted were failure on the fixation position that had the similar maximum pull out strength comparing with control group. Conclusions: From this study, we found the fixation strength of new design dilation nail is greater than the control interference screw group. It is revealed the feasibility of this new design in clinical application.
延伸閱讀
- Lin, J., Lin, S. J., Chiang, H. S., & Hou, S. M. (2001). 新設計之脛骨鎖定螺絲之機械測試. Journal of Orthopaedic Surgery Taiwan, 18(1), 24-29. https://www.airitilibrary.com/Article/Detail?DocID=10116923-200103-18-1-24-29-a
- 郭鐘懋（2013）。高位脛骨截骨手術骨板骨釘系統在人體步態週期中之生物力學與穩定度比較〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-2307201316551000
- 李柏豪（2015）。低切跡脛骨板狀外固定器之生物力學評估〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu201600284
- Cheng, K. C., Lee, H. M., Hung, S. T., & Shih, J. T. (2007). 前十字韌帶重建術後之脛骨前囊腫併發於使用可吸收性螺絲固定複合式韌帶移植體：一病例報告. Journal of Orthopaedic Surgery Taiwan, 24(2), 51-55. https://www.airitilibrary.com/Article/Detail?DocID=10116923-200706-24-2-51-55-a
- Ip, W. Y. (2002). Design and biomechanical study of internal fixation devices for difficult phalangeal fractures [master's thesis, The University of Hong Kong]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0029-1812201200003445