本論文研究光固化高分子分散膽固醇液晶膜(Polymer-Dispersed cholesteric Liquid Crystal film,PDLC film);實驗中改變光固化壓克力樹脂的oligomer官能基數,並添加不同含量的含氟助劑(FAAC),經紫外光光固化製作成PDLC元件。論文分成兩部分來探討;Part 1為六官能基oligomer之光固化壓克力樹脂添加不同含量的含氟助劑(FAAC)後與膽固醇液晶製造成PDLC元件,並觀察PDLC元件微胞變化及光電性質;Part 2為多官能基oligomer之光固化壓克力樹脂添加不同含量的含氟助劑(FAAC)後與膽固醇液晶製造成PDLC元件,並觀察PDLC元件微胞變化及光電性質。 實驗結果顯示,在Part 1實驗中,添加20wt%FAAC的六官能基oligomer配方膠可得最高的元件反射率10.86%;在Part 2實驗中,添加FAAC1wt%的多官能oligomer配方膠可得最高的元件反射率11.08%,且微胞平均粒徑為16.16μm。 但在Part 2實驗中,添加0wt%FAAC時,雖然PDLC元件反射率只有10.55%,但微胞構型完整且微胞大小約18.44μm,顯示其具有很大的改善空間。將添加0wt%FAAC的多官能基配方膠配合最佳製程參數後,驅動電壓55V時元件反射率可達29.36%,且元件之水平視角為-40至+40度。
In this study, we report a single-substrate method for fabrication of reflective and bistable cholesteric liquid crystal displays on substrates based on “polymer-dispered liquid crystal” of liquid crystal in a polymer matrix to create a close-packed monolayer. The displays may be on a large scale and exhibit switching voltages and reflectance approaching two-substrate “polymer-dispered liquid crystal” method.