Prediction of Compressive and Tensile Strength of Asphalt Concrete

The failure characteristics of asphalt mixtures should be known in order to be able durable pavements. Tension and compression tests performed at a range of strain rates and temperatures are needed in order to obtain a full picture of these failure characteristics. Tension and compression tests are not simple tests and will most probably not be used for practical situations. Therefore a study was initiated at the Delft University to develop a model which allows the tensile and compressive strength to be estimated from mixture parameters. This paper describes the materials tested, the test equipment as well as the model that was derived.

並列關鍵字

Compression testing ； Strength prediction ； Tension testing

被引用紀錄

陳奕慈（2013）。網路創業育成中知識分享與創新行為之研究〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/CYCU.2013.00110

Mai, V. D. (2011). 統包工程採購方式的問題與解決策略—越南與台灣之比較 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2011.00632

吳兆開（2006）。以撓褶式機構實現之新型六自由度電磁致動精密定位平臺〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2006.00809

Huang, H. H. (2005). 以撓褶式機構設計並實現之新型三自由度電磁致動奈米定位平臺 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2005.01385

葉銘欽（2012）。以微觀影像解析多孔隙瀝青混凝土耐久特性之研究〔博士論文，國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-1903201314443183

國際替代計量

Prediction of Compressive and Tensile Strength of Asphalt Concrete

全文下載

主題瀏覽