雲林土庫順天宮1935年改築仕樣書探究大木材料計畫

The Timber Material Planning of a Traditional Taiwanese Timber Building-Based on the Design Specification of the 1935 Rebuild Yunlin Tuku Shun-Tian Temple

林延隆(Yen-Lung Lin) ； 蔡侑樺(Yu-Hua Tsai) ； 徐明福(Min-Fu Hsu)

《建築學報》 113期 (2020/09) Pp. 67-86

https://doi.org/10.3966/101632122020090113004

摘要

仕樣書係於日治時期引入臺灣，作為設計與施工間之媒介，藉以說明建築物各部構造、構法、材料、數量等。土庫順天宮於1935年改建時所作之仕樣書包含〈設計仕樣書〉及〈設計書〉兩個部份，由〈設計仕樣書〉以文句敘述修建各殿面積、構造等之尺寸及材料；〈設計書〉則以表格呈現各構件尺寸、單價。經由分析可判斷此文獻的作成必然由具備漢式大木作實務經驗的大木司阜共同參與，而承載當時大木司阜對於算料、計工之相關知識。本研究透過分析「仕樣書」記載內容，試圖探究其中木作之開料、算料和計工方式。研究發現，工料計畫依序始從制定設計尺寸開始，其後需計算材積、考慮木材搬運趟次、從而求得材料取得成本，加入工資及假設工程後，完成整個預算編列。其中開料尺寸會依構件性質之需要而預留長度；算料未必是以木材斷面直接乘以長度，針對長大材會採加寸或加分方式計算材積；計工為最後的估算項目，但僅依現有文獻，尚無法確切掌握實際計工方法。

關鍵字

大木構造 ； 仕樣書 ； 疊斗式 ； 架棟

並列摘要

Design specification was introduced to Taiwan during the Japanese colonial period as a medium for design to construction. Each part of the building might be recorded on the specification, for explaining the construction, material dimensions and the quantity. Since Yunlin Tuku Shun-Tian Temple was rebuilt in 1935, a specification was the document left by the design process at that time. The specification consists of two parts: the ＂design specification book＂ and the ＂design book＂. The ＂design specification book＂ describes the construction method of the temple, and the ＂design book＂ presents the dimensions and unit price of each member in a table form. Through analysis, the study believe the document must be completed by experienced carpenters. Therefore, it bears the relevant knowledge of material planning of a traditional Taiwanese timber building. This study attempts to explore material planning process about the timber part. It must begin with the development of design dimensions. After that, the volume should be calculated, then considering the handling times, total came out the material costs. The reserved length is an important point by considering the member dimensions. About the volume calculation, especially for the too long members, additional volume should be added in the calculation, in line with the timber market at the time.

並列關鍵字

Timber Structure ； Specification ； Dieh-Dou Timber Frame

參考文獻

林志浩（2003）。嘉義慈濟宮志。嘉義市：嘉義慈濟宮管理委員會。Lin, C. H. (2003). History of Tzu Chi Temple, Chiayi. Chiayi City: Tzu Chi Temple, Chiayi.

邱上嘉（1990）。台灣一般傳統木構造民宅營造技術的多樣性研究－以嘉南平原地區匠師訪談為例。臺中市：東海大學碩士論文。Qiu, S. J. (1990). Research on the Diversity of the Construction Techniques of General Taiwanese Traditional Wooden Civilian Habitations: Through Examples of Interviews with Local Artisans in the Chia-Nan Plain Region. Taichung City: Master thesis of Tunghai University.

徐明福（1990）。臺灣傳統民宅及其地方性史料之研究。臺北市：胡氏圖書出版。Hsu, M. F. (1990). A Research about the Taiwanese Traditional Buildings and the Local Historical Materials. Taipei City: Hu Books.

徐裕健（1980）。台灣傳統建築營建尺寸規制之研究。臺南市：國立成功大學碩士論文。Xu, Y. J. (1980). The Planning Sizes of Taiwan Traditional Buildings. Tainan City: Master thesis of National Cheng Kung University.

陳玫杏（2006）。台灣古蹟修復工程預算編列之研究以台南市傳統寺廟類建築疊斗式木構架大木作為例（1990∼2006）。臺南市：國立成功大學碩士論文。Chen, M. H. (2006). The Study on the Budget of Conservation Works for Listed Historic Buildings in Taiwan-Examples of Wooden Structural Works on Diedou Frame of Traditional Temples in Tainan City (1990∼2006).Tainan City: Master thesis of National Cheng Kung University.