電動車石墨烯浸潤式冷卻電池熱管理系統技術

Graphene Immersion Cooling Technology for Battery Thermal Management in Electric Vehicles

何亞奇 ； 林正軒 ； 胡恩蘭 ； 吳采亮

《機械工業雜誌》 486期 (2023/09) Pp. 37-43

摘要

本文主要探討浸潤式冷卻技術在電動車電池系統中的應用。電動車因高馬力的輸出與快速充電的需求逐年提升，導致電池的發熱量不斷增加，然而高溫對電池性能和壽命的不良影響成為一個關鍵問題。利用石墨烯浸潤式冷卻技術可以提供更穩定的溫度控制，延長電池的壽命，同時提高車輛的性能和安全性。隨著對電動車需求的增加，浸潤式冷卻技術有望在未來得到廣泛應用。

關鍵字

電動車 ； 電池熱管理系統 ； 石墨烯浸潤式冷卻

並列摘要

This article primarily explores the application of immersive cooling technology in electric vehicle battery systems. As the demand for electric vehicles continues to rise due to high power output and fast charging requirements, the heat generation of batteries also increases. However, the adverse effects of high temperatures on battery performance and lifespan have become a critical issue. Graphene immersion cooling technology can provide more stable temperature control, prolong the lifespan of batteries, and enhance vehicle performance and safety. With the increasing demand for electric vehicles, immersive cooling technology is expected to be widely applied in the future.

並列關鍵字

Electric vehicle ； Battery thermal management system ； Graphene immersion cooling

參考文獻

E. Doroudchi, K. Alanne, Ö. Okur, J. Kyyrä, and M. Lehtonen, “Approaching net zero energy housing through integrated EV,” Sustain. Cities Soc. 38, 534–542, 2018.

C. Chu, B.W. Kwon, W. Lee, and Y. Kwon, “Effect of temperature on the performance of aqueous redox flow battery using carboxylic acid functionalized alloxazine and ferrocyanide redox couple,” Korean J. Chem. Eng 36(10), 1732–1739, 2019.

C. Maxwell, “A Treatise on Electricity and Magnetism,” 2nd Ed., Oxford University Press, 435–441, 1904.

R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Ind & Engr. Chem. Fundamentals 1(3), 187–191, 1962.

A. S. Ahuja, “Augmentation of heat transfer in laminar flow of polystyrene suspension,” J. Appl. Phys. 46, 3408–3425, 1975.