- 期刊
Research on Stress and Deformation of Storage Tank under Wind Load Based on Finite Element
摘要
In order to study the stability of the storage tank under strong wind load and ensure the safe operation of the oil tank, finite element analysis was used to solve the wind‐induced buckling mechanism of the 50000 m3 steel storage tank under wind load, and the stress stability of the storage tank under non‐standard conditions was analyzed. Numerical simulation is carried out, and it is calculated that the wind load pressure of the oil tank is mainly on the windward side with a circumferential angle of about 60°, and the wind pressure at the stagnation point is the largest; the analysis results can be used for the wind resistance stability design of large steel storage tank structures. provide a theoretical basis.
參考文獻
KUNDURPI P S, JOHNS D J, SAMAVEDAM G. Stability of cantilever shells under wind loads [J]. Journal of the Engineering Mechanics Division, 1975, 101(5):517-530.
G. PORTELA, L. A. GODOY. Wind pressures and buckling of cylindrical steel tanks with a dome Roof [J]. Journal of Constructional Steel Research. 61 (2005), 808-824.
HOLROYD R J. On the behaviour of open-topped oil storage tanks in high winds. Part III. A structural dynamic instability mechanism [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1985, 21 (3):339- 341.
UEMATSU Y, UCHIYAMA K. Deflection and buckling behavior of thin, circular
Cylindrical shells under wind loads [J]. Journal of Wind Engineering and Industrial