- 期刊
Structural Analysis of Key Components of Plate Type Solar Cell Module Laminator
摘要
The three-dimensional model of the laminated plate solar cell component is established by three-dimensional software, and the finite element analysis software ANSYS Workbench is used to analyze the key components of the laminated plate and the heating plate of the laminated plate. The analysis results show that the deformation of the bottom surface of the laminated plate is less than 3.7012 × 10^(-9) mm and the deformation is uniform, indicating that the force exerted by the electric cylinder on the battery component is balanced. In the heating process, the maximum deformation of heating plate edge is 7.1256×10^(-7) mm, and the deformation is small, which does not affect the pressure effect.
參考文獻
Gao Changyin, Li Wanquan, Liu Li, etc. ANSYS Workbench 14.5 Modeling and Simulation [M]. Beijing, Electronic Industry Press, 2014.
Tian Keqing, Zhang Kun, Wu Yu, etc., modeling and simulation analysis of KB20 self-propelled curbstone sliding machine frame [J]. Science and technology innovation report, 2018,15 (33): 83-85.
Sun Jianqiang. The experimental analysis of buckling and thermal fatigue of nano-scale thin films under force-thermal coupling field [D]. Tianjin University, 2008.
Long chengshu. Paddy heat pump drying process and key components design [D]. Central South University of Forestry and Technology, 2014.
Xu. Numerical simulation and performance analysis of concrete based on material meso-structure [D]. Zhejiang University, 2008.