透過您的圖書館登入
IP:3.138.189.0
  • 期刊

3D掃描技術應用於文化資產之適用性討論

The Study on the Applicability of 3D Scanning Technology Used for Cultural Heritage

摘要


隨著光學技術與電腦工業的發展,近年來3D掃描技術之發展日益躍進,於文化資產之應用也日益廣泛,且由於該技術具有非接觸性之優點,可在最低干擾與污染的清況下詳細記錄包括古蹟、遺址與文物等各類文化資產之表面立體型態,建立文化資產於該時空背景下之數位3D模型。然而市面上各類3D掃描儀器種類繁多,且文化資產於保存、修復、展示及教育推廣等各類別之工作對於數位3D模型需求亦不盡相同,因此根據任務需求選擇適合的3D掃描技術實乃進行3D掃描之最初也是最重要的工作之一。本文嘗試對於不同解析度與精準度之各類3D掃描技術(包含地載光達、雷射掃描、結構光掃描、顯微3D等技術)應用於文化資產各項工作之適用性進行討論與分析;此外,由於各類3D掃描技術之原理不同,應用於建立各類文化資產之3D模型皆有不同的限制性,因此本文亦針對其限制性進行討論,期望文中所述之內容能提供非測量領域專業的操作人員於進行文化資產3D掃描工作前之參考。

關鍵字

3D掃描 文化資產 解析度 精準度

並列摘要


Three-dimensional scanning technology (3D scanning technology) has been widely applied in various fields, such as the automotive industry, medicine, the entertainment industry, architecture, cultural heritage, and so on. Because the shape of a certain cultural heritage item existed in a specific space and time, it can be scanned, and its 3D data may be collected and stored as a 3D model through 3D scanning technology with no need to make contact with the cultural heritage item. However, there are many kinds of commercial devices which can be utilized to perform 3D data acquisition and create 3D models. When 3D scanning technology is applied to different aspects of cultural heritage, such as conservation, restoration, exhibition, and education, the requirements of 3D modeling are different. This paper performed a preliminary study on 3D scanning technology (Comprising Lidar, Structured Light 3D Scanner, Handheld Laser Scanner, Micro 3D scanner) with different levels of resolution and accuracy used to perform different kinds of cultural heritage tasks. The technology's limitations were also discussed. It is expected that the outcome of this study will be helpful for amateurs seeking to perform 3D scans of cultural heritage items.

並列關鍵字

3D Scanning Cultural Heritage Resolution Accuracy

參考文獻


王中平(2013)《應用三維雷射掃描儀於古蹟建物多期監測之評估》(碩士論文),國立臺北科技大學,土木與防災研究所。
王壽來,李麗芳,鄭明水,邵慶旺,張舜孔(2010)《立體科學調查數據之建立與應用研究:以清乾隆漢滿文御碑為例》,行政院文化建設委員會文化資產總管理處籌備處99年度自行研究計畫。
王壽來,李麗芳,鄭明水,陳柏欽,邵慶旺,張舜孔(2011)《文化資產微變異檢測技術研究》,行政院文化建設委員會文化資產總管理處籌備處100年度自行研究計畫。
宋周燕(2007)《攝影測量和透地雷達在數位典藏上之應用——以臺灣府城垣小東門段為例》(碩士論文),國立成功大學,土木工程學系。
李家宇(2012)《3D都市尺度雷射掃瞄在建築數位典藏之應用——以新竹縣北埔鄉、竹東鎮及大臺北地區為例》(博士論文),國立臺灣科技大學,建築系。

被引用紀錄


張舜孔、王伯仁、林雅娟、林逸琇(2019)。3D數位建模技術應用於室外文物保存紀錄之研究-以鳳山縣舊城北門門神為例文化資產保存學刊(50),31-57。https://doi.org/10.6941/JCHC.201912_(50).0002
楊文斌、王聰榮、閻亞寧(2017)。近景攝影測量於古蹟、歷史建築之數位化運用與推廣文化資產保存學刊(40),55-75。https://doi.org/10.6941/JCHC.201706_(40).0004
蔡育林、陳俊宇、何佩真(2016)。三維建模技術於出水遺物保存維護工作之應用案例探討文化資產保存學刊(37),43-60。https://doi.org/10.6941/JCHC.201609_(37).0004
蔡育林、張舜孔、姚良居(2015)。立體掃描在文物保存研究之應用初探文化資產保存學刊(33),7-21。https://doi.org/10.6941/JCHC.201509_(33).0001

延伸閱讀