背光模組之集光型擴散片的製備及性能研究

Characteristic of Enhance Brightness Diffuser Film for the Backlight Module

陳江泓(Jyang-Hong Chen)

指導教授 ： 黃振球

元智大學/工程學院/化學工程與材料科學學系/碩士(2008年)

https://doi.org/10.6838/YZU.2008.00265

摘要

本研究將針對背光模組之中的擴散片其製備及性能進行研究，主要研究內容是利用熱硬化型樹脂為主體，再將具有不同粒徑大小的擴散微粒子摻入熱硬化型樹脂中，待樹脂摻合完成後以塗佈機將樹脂塗佈於聚酯膜上形成光學薄膜，再用烤箱熱風使薄膜硬化；測試其光學結果表現，挑選合適的擴散粒子粒徑，再以粒徑分佈為主要的因子進行塗佈製膜，以光學檢驗設備量測薄膜的擴散集光效能作為評估。

關鍵字

擴散片 ； 粒徑 ； 集光 ； 熱硬化型樹脂 ； 擴散微粒子

並列摘要

Research this slices of their prepare and performance go on research to the diffusing film in a backlight module, it mainly research contents are the main body in order to utilize thermosetting type resin, the thermosetting resin is hitting to mix the particle with different size, become membrane with the mechanism of the coating after the resin is mixed and finished jointly, and then make the membrane harden with the oven hot wind. Test its optics result, then select suitable diffusion particle size, it go on coating make membrane with particle size distribution for main factor, collect all efficiency conduct to assess with the diffusion which examines the membrane of the amount of equipment examined of optics.

並列關鍵字

diffusing film ； particle size ； enhance brightness

參考文獻

28. 宣茂科技股份有限公司，“可改善光線輝線現象之光學元件，”中華民國第94221787號專利 (2005)。

2. M. Anandan, et al., “Electron Devices,”pp. 1327 (1992).

3. T. Akihiro, et al., “The advanced highly scattering optical transmission polymer backlight for liquid crystal displays,”Japan Society of Applied Physics (2002).

4. T. Okumura, et al., “Highly-Efficient Backlight for Liquid Crystal Display Having No Optical Films,” Applied Physics Letters, Vol. 83, pp. 2515-2517 (2003).

17. Radford, et al., “Reflectivity of Iridescent Coextruded Multilayered Plastic Films,”Polymer Engineering and Science, Vol. 13, pp. 216-221 (1973).