植物殘枝粉碎機之研製

Manufacture on Crusher of Residual of Plant

邱銀珍(Yn-Jen Chiou) ； 葉永章(Yung-Chang Yeh)

《桃園區農業改良場研究彙報》 65期 (2009/06) Pp. 61-65

https://doi.org/10.29567/ZHWHGX.200906.0006

摘要

本機主要由挾持機構、粉碎機構、物料輸出機構、動力傳送機構及機體等部份組合而成。經測試結果本機可克服綠竹表皮光滑及長纖維不利粉碎之困擾，且綠竹粉碎情形良好，配合皮帶輸送粉碎物之排放通順，輸出於機體側方，配合四輪式可轉向行走設計，便於田間移動進行植物殘枝粉碎作業。本機工作效率250－300 kg/hr。

關鍵字

植物 ； 殘枝 ； 粉碎機

並列摘要

This machine consisted of frame, grip mechanism, crush mechanism, power transmission mechanism and body etc. The operation test of this machine showed the skid of the limb of plant by grip mechanism and this resulted in lowering the efficiency of crushing operation. The crush mechanism had good and smooth operation and never blocking. However, the crushed material was discharge only in one side by using the belt conveyor and this resulted in the difficulty of transmission of crushed material. Nowadays, the moving mechanism was designed by wheels. All of the modifications are in test. It works efficiency is 250-300 kg/hr.

並列關鍵字

plant ； residual ； crusher