透過您的圖書館登入
IP:3.144.81.47
  • 期刊

Investigation about Optimized Dimensions of the Detective Tray for a Sedimentation Balance Type Particle Size Analyzer

並列摘要


Experimental and theoretical studies have been conducted about the influence of the particles and dispersion medium behavior in the sedimentation bath on measuring the particle size distribution with the sedimentation balance. It is found that an increase in the height of the peripheral wall of a detective tray raises the downstream velocity outside the tray and lessens the particle movement in radial direction. Hence, the initial rate of increase in a sedimentation curve is larger than that of the theoretical line , the total sedimentation mass agrees with the theoretical value. Since the downstream velocity along the inner wall of the sedimentation bath decreases with decreasing the diameter of the tray, both the initial rate and the total mass come close to the theoretical values. It is found that the size range increases. This is because smaller particles are affected strongly by the flow of the dispersion medium. Furthermore, it is suggested that the numerical simulation proposed in this paper can optimize dimensions of the sedimentation balance type particle size analyzer.

被引用紀錄


楊樺成(2015)。深冷變形與陽極處理對6066-T6機械性質的影響〔碩士論文,國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-0412201512080497

延伸閱讀