- 期刊
Separation Efficiency of a Centrifugal Fluidized Bed Classifier in the Micron Range
並列摘要
Solid liquid separation is a standard task in modern chemical industry. Therefore various different technologies and equipment exist for this task. However, especially for cut sizes in the micron range all of the existing devices show drawbacks, e.g. regarding separation sharpness, throughput, yield of fines, etc. This article describes a novel device for solid-liquid separation with cut sizes in the micron range which was built to close the gap of solid-liquid separation equipment in the micron range. The operating principle and design concept of the device are explained, its separation performance for standard slurries and different operating conditions as well as degrees of freedom and optimisation strategy are outlined.
被引用紀錄
余靜雯（2008）。兩岸壽險業經營績效之探討-Metafrontier 模型之應用〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2008.00549
張立杰（2008）。外人直接投資對亞洲開發中國家之經濟成長的影響〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2008.00529
陳盈秀（2007）。OECD與APEC諸國總體生產效率與總要素生產力之研究 ─ 共同邊界函數之應用〔博士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2007.00647
林郁雯（2006）。OECD諸國總體生產效率與生產力之研究〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2006.00935
邱郁芳（2006）。應用共同成本函數探討東亞六國銀行業之生產效率〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2006.00208
延伸閱讀
- Yang, X., Qiao, Y., Han, X., Liu, B., Shah, K. J., & Chiang, P. C. (2020). Sensitivity Analysis of Carbonate Looping Process Using Twin Fluidized Bed Model. Aerosol and Air Quality Research, 20(12), 2889-2900. https://doi.org/10.4209/aaqr.2020.07.0436
- Chen, C. H. (2009). Performance Evaluation of Aqueous Carbonation by Fluidized Bed Reactor [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2009.00508
- 詹豐隆（2004）。The Application of Using Fluidized-Bed Crystallization to Treat Nickel-containing Wastewater〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2004.01608
- Zuo, Z. G., Liu, S. H., Fan, Y. Z., & Wu, Y. L. (2014). Optimization of a Centrifugal Boiler Circulating Pump's Casing Based on CFD and FEM Analyses. Advances in Mechanical Engineering, 2014(), 527-536. https://doi.org/10.1155/2014/532892
- 蘇豊棋（2003）。A Study of Elutriation in a Vortexing Fluidized Bed Using Response Surface Methodology〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200300607