並列摘要
Employment of forced plant conveyor with auxiliary divider to the front assembly to replace the old one is studied. This device can make the plant holding upright more stably and eliminates the winding problems resulted from abnormal long vines. With the aid of a strengthen ejector and a break-away device, the discharge of plant after picking becomes certain. The load may be reduced by the modification of the front upper conveyor and the driving shaft of the bagging units. There are no damage and slippage found by using the driving unit. The general capacity of the harvester is then increased to a desired rate.
延伸閱讀
- 林義恭、蔡承良、楊允聰（1997）。引進之二段式落花生收穫機收穫調查。臺南區農業改良場研究彙報，(34)，51-59。https://doi.org/10.29558/XLZY.199712.0006
- 侯金日（2020）。落花生有機種子生產技術之開發。桃園區農業技術專輯，(13)，78-86。https://www.airitilibrary.com/Article/Detail?DocID=P20131022001-202012-202101110010-202101110010-78-86
- 梁連勝、陸龍虎、顏秀榮（1994）。農試型落花生聯合收穫機油壓動力系統液壓油冷卻效果之探討分析。中華農業研究，43(4)，433-438。https://doi.org/10.29951/JARC.199412.0009
- 鄔清標、黃光華、周清枝（1976）。小型聯合收穫機試造。中華農業研究，25(1)，73-83。https://doi.org/10.29951/JARC.197603.0009
- 江國忠、王銀波（1993）。Studies on the Causes of Abnormal Growth of Peanut in Acid Soils。花蓮區農業改良場研究彙報，(9)，42-53。https://doi.org/10.6957/RBHDAIS.199305.0042