透過您的圖書館登入
IP:18.118.226.105
  • 期刊

模壓式製造木材粒片—塑膠複合材戶外利用之接受性調查(II)曝露20個月後之狀況

Acceptance of Wood Particle-Plastic Composites Manufactured by Compression Mold in Outdoor Applications (II) Outdoor Exposure after 20 Months

摘要


木材粒片—塑膠複合材作為戶外用之長條凳及解說牌,實際於戶外使用後,對使用者進行問卷調查,結果顯示以單張單面刷之問卷可降低無效問卷數,提高有效問卷率。而受訪者之背景與新安裝時之調查結果,差異不顯著,且對於各問項之答覆差異不大,受訪者對於木材粒片一塑膠複合材產品的價格及複合材在製造過程、使用期間及最後材料丟棄時,是否會造成二次污染有較大的疑慮;另外建議應該多方向的開發應用及推廣,可以舉辦展示活動或將此材料的研發技術轉移給廠商大量製造生產。受訪者所提出之寶貴意見,將是日後生產木材粒片—塑膠複合材之滿意度及適宜性在使用4個月後有些微的降低,但整體而言受訪者認為此複合材適合做為戶外用材,對於戶外長條凳之使用情況仍為滿意。然而木材粒片—塑膠合材與一般戶外用材一樣,必須定期維護保養才能延長其使用年限。

並列摘要


Leisure benches and explanation signboards made of wood particle-plastic composite beside outdoor exposure, carrying on questionnaire investigation to the user, the result shows that the questionnaire printed with one page on one side which can reduce the invalid questionnaire and increases, the questionnaire rate effectively. And the interviewees' background and investigation result while installing newly, the difference is not apparent, and to each asking that the answer difference of one is not large, between interviewee and price also manufacture process of wood particle-plastic composites, when using and abandoning treatment at last of composite products, whether will cause the secondary pollution to have greater doubts; Should suggestion in addition multi application development and promotion, it can exhibit that products and transfer that technique to industry producer. The valuable suggestion of interviewees is useful for the production of wood particle-plastic composite in the future. There will be little reduce their satisfaction and suitability than the result of using 4 months. But this result is still satisfied. But this wood particle-plastic composite like generally outdoor materials, it need to maintain on time in order to extend the life cycle of the wood particle-plastic composite.

延伸閱讀