氣壓式桂圓剝肉機構設計與試驗

The Designation and Test of Dried Longan Pneumatic Flesh-Peeling Machine

潘郁婷(Yu-Ting Pan) ； 李雅能(Ya-Nang Lee) ； 陳昱全(Yu-Chuan Chen) ； 鄭經偉(Ching-Wei Cheng)

《農林學報》 61卷4期 (2012/12) Pp. 337-351

https://doi.org/10.30089/JAF.201212.0002

摘要

本研究旨在設計桂圓（俗稱龍眼乾）剝肉機構。以模擬雙手拇指向下擠壓，且其餘手指由底部沿弧狀向上刮起之動作為構想設計剝肉機構。此機構由一組各別配置刀片之對稱L型架配合一組氣壓缸擠壓裝置等組合而成，俗稱鴨嘴機構，組成方式為氣壓缸做垂直往復運動，於氣壓缸導桿上連接之大圓柱裝置凸輪機構使兩側L型架組做左右開合動作。另於L型架上設置弧形刀片，沿桂圓外圍刮除，達成完整剝肉之目的。實驗材料採用市售已乾燥之桂圓，經試驗發現氣壓缸擠壓速度在2.85 mm/s之剝肉效果最佳。以蒂頭朝上之剝肉成功率最高為73.23 %，作業能力為每小時0.84公斤，且剝除後果肉型態完整，符合桂圓食品加工業者要求。

關鍵字

氣壓式 ； 桂圓 ； 剝肉機構

並列摘要

The objective of this study was to design the mechanism of the dried longan's flesh-peeling. The idea of this mechanism's designation was to simulate the hands tumb squeezing down, and the other fingers blowed it up from the bottom along the curved. This mechanism was a combination of a symmetric L-shaped bracket with blades and a pneumatic cylinder extrusion device. The composition was that the pneumatic cylinder did vertical reciprocate to guide the cam mechanism on the link so that both side of the L-shaped brackets could do open and close around. In addition, it was setted up curved blades on the L-shaped bracket in order to peel the flesh clearly. The material of this experiment were commercially available dried longans. According to the research data , when the speed of pneumatic cylinder extrusion is 2.85 mm/s, it had the best result. The rate of successfully peeling flesh by pedicle head-on was up to 73.23 %, and the working capability was 0.84 kg/hr. The pattern of the peeled flesh was complete, and it was in line with the food processing industry request.

並列關鍵字

Pneumatic ； Dried longan ； Flesh-peeling