透過您的圖書館登入
IP:3.145.17.46
  • 期刊
  • OpenAccess

A Study of the Dependence of Electrohydrodynamic Jetting on the Process Parameters and Liquid Physical Properties

並列摘要


The role of the applied voltage and liquid physical properties in the stable cone jet formation has been investigated in this paper. A higher pulse voltage of large duty cycles superimposed on a high bias voltage produced a stable cone jet under constant applied pressure. The critical voltage required for the formation of the stable cone jet decreased with an increase in the applied pressure for solutions having different conductivities. As compared to low viscous and high conductive solutions, high viscosity liquids with low conductivity were unable to form a stable cone jet easily at higher frequencies and low pulse time. The experimental results indicate that there is a strong relationship among these parameters, and a precise control of these parameters is required to achieve high quality electrohydrodynamic (EHD) jetting. Also five dimensionless parameters have been derived using the Buckingham II theorem, and their effect on EHD jetting has been analyzed thoroughly.

並列關鍵字

無資料

被引用紀錄


葉柏宏(2014)。低溫液態製程金屬氧化物薄膜電晶體〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2014.00357
趙守敬(2012)。成長後退火對有機薄膜電晶體之電性影響探討〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2012.00921
Cheng, W. (2011). 不同材料的背電極對溶液製程金屬氧化物薄膜電晶體之特性影響 [master's thesis, National Chiao Tung University]. Airiti Library. https://doi.org/10.6842/NCTU.2011.00445
王業昇(2009)。可生物相容的聚苯乙烯尿嘧啶奈米纖維之製備與光交聯〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2009.00059

延伸閱讀