- 期刊
鑄件凝固的界面熱傳係數的決定
The Determination of Interface Heat Transfer Coefficient in Casting Solidification
並列摘要
It is very important to know the interface heat transfer coefficient, h, at casting-mold interface in casting. The heat transfer coefficient in heat transfer analysis must be decided for computer simulation. Commercial software ProCAST was used to run the solidification simulation with several input values of h. The temperatures of several locations were selected from each simulation and compared with the experiment data from thermal couple temperature recordings. In this way the best fit value of h can be determines easily.
延伸閱讀
- 黃和全、張永輝、林冠儒（1991）。連鑄模內鋼液固化熱傳程序之研究。鑛冶：中國鑛冶工程學會會刊，35(2)，134-141。https://doi.org/10.30069/MM.199106_35(2).0015
- 陳聰堅（2001）。熔裝固化鑄模內壁面接觸熱傳係數之逆向估算。中國航空太空學會學刊，33(3)，209-215。https://doi.org/10.6124/TAASRC.200109_33(3).09
- 卓炳勳（2013）。化學組成及熱處理條件對於低熱膨脹鑄鐵尺寸穩定性之影響〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2013.01039
- 陳力豪（2013）。合金組成與熱處理條件對低熱膨脹鑄鐵之熱膨脹係數的影響〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2013.00107
- Wu, H. L., & Hsu, S. Y. (2016). One-Dimensional Modeling of Heat Transfer in Intumescent Coating Material. 燃燒季刊, (92), 4-15. https://doi.org/10.30041/CQ.201602_(92).0001