- 期刊
鋼筋混凝土梁剪力容量設計之破壞機率研究
Failure Probability of Shear Capacity Design of Reinforced Concrete Beams
摘要
本文旨在探討鋼筋混凝土梁剪力容量設計之安全性。2002年陳和呂針對根據ACI318-99規範進行剪力容量設計之梁，探討其安全性。本文針對根據ACI318-02規範進行剪力容量設計之梁，在考慮混凝土強度、鋼筋強度，斷面尺寸，混凝土極限壓縮應變及載重等皆為隨機變數之情形下以蒙地卡羅法分析其破壞機率。研究結果顯示，若剪力破壞機率限制為4%，則對於撓曲鋼筋採用SD280之梁並不保守，對於撓曲鋼筋採用SD420之梁卻又稍嫌過於保守。就剪力破壞機率而言，根據ACI318-02規範進行剪力容量設計之梁，其剪力破壞機率會低於根據ACI318-99規範進行剪力容量設計之梁。
並列摘要
The objective of this paper is to investigate the safety of the shear capacity design of reinforced concrete beams. The safety of the shear capacity design of beams designed using the ACI 318-99 Code was investigated by Chen and Lu (2002). The random variables considered in this study are the concrete strength, the reinforcing steel strength, the cross section dimensions, the ultimate compression strain on the concrete and the loading. The probability of shear failure of beams designed using the ACI 318-02 Code is determined by the Monte Carlo technique. If the probability of shear failure is limited to 4%, beams with SD 280 flexural steel are not conservative, but beams with SD 420 flexural steel are over conservative. The probability of shear failure of beams designed using the ACI 318-02 Code is however; lower than when using the ACI 318-99 Code.
延伸閱讀
- 邱建國、陳崇慶、林芳慶、紀凱甯（2014）。實尺寸高強度鋼筋混凝土梁之剪力裂縫行為研究。結構工程，29(4)，19-43。https://doi.org/10.6849/SE.201412_29(4).0002
- 劉昪彣（2011）。實尺寸鋼筋混凝土梁剪力補強試驗研究〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1908201118091800
- 宋裕祺、蕭嘉慶、賴明俊、柯鎮洋（2011）。考慮梁柱接頭剪力破壞之鋼筋混凝土構架側推分析。結構工程，26(1)，3-20。https://doi.org/10.6849/SE.201103_26(1).0001
- 蕭嘉慶（2009）。考慮梁柱接頭剪力破壞之鋼筋混凝土構架側推分析〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-2007200900405100
- Lim, E. (2015). Cyclic Shear Strength and Seismic Design of Reinforced Concrete Coupling Beams [doctoral dissertation, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2015.02780