並列摘要
The present work reviewed studies of hydrogen embrittlement in titanium alloys. Some factors that affect the hydrogen embrittlement, such as temperature, hydrogen content, stress state, and microstructure were discussed. At the same time, the mechanisms of hydrogen- induced crack growth in titanium alloys were critically reviewed, and some controversial problems of the mechanisms were pointed out and discussed.
被引用紀錄
陳政儒（2010）。鈦合金Ti-6Al-4V應用電漿銲之銲接性研究〔碩士論文，國立臺灣師範大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0021-1610201315192303
延伸閱讀
- 林靜枝、彭宗平（1995）。鐵鎳基非晶質合金之氫致脆裂。防蝕工程，9(3)，141-147。https://doi.org/10.6376/JCCE.199509.0141
- 邱偉誠（2014）。鈦鎳銅形狀記憶合金表面金屬離子腐蝕浸出之研究〔碩士論文，國立宜蘭大學〕。華藝線上圖書館。https://doi.org/10.6820/NIU.2014.00121
- 吳臺一、吳建國（1997）。鈦合金電解滲氫表面氫化物結構與成份分析。鑛冶：中國鑛冶工程學會會刊，41(4)，43-47。https://doi.org/10.30069/MM.199712_41(4).0003
- 李深智（1995）。電漿氮化表面改質TiN超硬鍍膜仙層對鈦合金氫脆化研究：破壞力學特性。防蝕工程，9(2)，83-86。https://doi.org/10.6376/JCCE.199506.0083
- 賴建霖（2011）。Hydrogen Embrittlement of Cold-worked 304L Stainless Steel and its Welds〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2011.03405