- 期刊
機械球磨填料對2205雙相不銹鋼真空硬焊件耐蝕性之影響
Effect of Mechanical Milled Filler Powder on the Corrosion Resistance of Vacuum Brazed Joints for 2205 Duplex Stainless Steel
摘要
並列摘要
The purpose of this study is to produce the brazing filler powders with different alloying compositions by mechanical milling. Duplex stainless steel plates were vacuum brazed by using the milled powder and their brazed joints were proceeded to the corrosion test. The partial amorphous powders were obtained by mechanical alloying (MA) from the mixture powders of BNi-3 and Cr2N. The weight loss of brazed joint using mechanical alloyed powder is smaller than that of brazed joint using the 3-hour milled BNi-3 powder.
延伸閱讀
- 塗成一、李汝桐、蔡文達（1998）。熱處理對2205雙相不銹鋼之晶界腐蝕影響研究。防蝕工程，12(2)，33-41。https://doi.org/10.6376/JCCE.199806.0033
- 王惠森、吳美惠、關聖立（2002）。焊接參數對超級雙相不銹鋼熔接焊道抗孔蝕影響之研究。防蝕工程，16(3)，165-173。https://doi.org/10.6376/JCCE.200209.0165
- 李義剛、陳維仁（2016）。SAF 2205雙相不銹鋼利用反覆式固溶處理細化晶粒之研究。科學與工程技術期刊，12(2)，53-61。https://www.airitilibrary.com/Article/Detail?DocID=18166563-201609-201610070007-201610070007-53-61
- 張記銨（2007）。活化網罩電漿滲氮對雙相不銹鋼腐蝕及磨耗性質之影響〔碩士論文，大同大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0081-0607200917242165
- 陳順發、姚智凱、黃維彬、李輝隆（2018）。A Study on the Microstructure and High Temperature Mechanical Properties of Inconel 713LC Formed by Metal Injection Molding。鑛冶：中國鑛冶工程學會會刊，62(3)，86-92。https://doi.org/10.30069/MM.201809_62(3).0011