Determining the Optimum Process Mean Under a Beta Distribution

考量貝他分配的最佳製程平均數設定

陳忠和(Chung-Ho Chen) ； 周昭宇(Chao-Yu Chou)

《工業工程學刊》 20卷1期 (2003/01) Pp. 27-32

https://doi.org/10.29977/JCIIE.200301.0005

摘要

Phillips與Cho [l7]已發展了品質特性爲貝他分配的最佳製程平均數設定方法，他們是采截尾二次損失函數來量測截尾貝他分配的品質損失。本研究將進一步提出産品具線性品質損失的修正的Phillips與Cho [7]模式來設定最佳製程平均數，幷探討此模式參數的敏感度分析。

關鍵字

品質損失函數 ； 貝他分配 ； 製程最佳化

並列摘要

Phillips and Cho [17] addressed a method for setting the optimum process mean when the quality characteristic is a beta distribution. They adopted the truncated quadratic loss function to measure the quality loss for a given truncated beta distribution. In this paper, we further propose the modified Phillips and Cho's [17] model with the linear quality loss for determining the optimum process mean. A numerical example is provided and the sensitivity analysis is conducted for illustration.

並列關鍵字

quality loss function ； beta distribution ； process optimization

參考文獻

Carlsson, O.(1984).Determining the Most Profitable Process Level for a Production Process under Different Sale Conditions.Journal of Quality Technology.16

Chandra, M. J.(2001).Statistical Quality Control.Florida, U. S. A.:CRC Press LLC.

Cho, B. R.,Leonard, M. S.(1997).Identification and extensions of quasiconvex quality loss functions.International Journal of Reliability, Quality and Safety Engineering.4

Golhar, D. Y.,Pollock, S. M.(1988).Determination of the Optimal Process Mean and the Upper Limit for a Canning Problem.Journal of Quality Technology.20

Lee, Min Koo,Hong, Sung Hoon,Elsayed, E. A.(2001).The optimum target value under single and two-stage screenings.Journal of Quality Technology.33