並列摘要
Small specimens of intact rock are the least expensive to obtain and test. However, the engineering property of rock mass is quite different from that obtained from a small specimens, due to of the presence of joints. This paper describes the applications of the in-situ test for determining the stress, strength, deformability and permeability of rock mass. Many important details of the in-situ test are discussed based on the authors, consulting experiences on site investigation.
延伸閱讀
- 廖日昇（1983）。岩石脆性破壞及地下坑室穩定性之初步探討。鑛冶：中國鑛冶工程學會會刊，27(4)，104-115。https://doi.org/10.30069/MM.198312_27(4).0009
- 李振誥、鄧博維、張瑞麟（1994）。岩體不連續面特性描述與評估之探討。地工技術，(46)，87-104。https://doi.org/10.30140/SG.199406.0008
- 張睿明（2021）。地動監測技術對於岩坡破壞案例與落石試驗之運用〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU202103708
- 謝其泰、王建力（2004）。The Measurement of the Crack Propagation in Rock Slab。鑛冶：中國鑛冶工程學會會刊，48(2)，165-175。https://doi.org/10.30069/MM.200406_48(2).0012
- 潘紹勇（2013）。Using laboratory rock core methods to estimate the in-situ stress at the Metamorphous granite area.〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1408201315560800