- 期刊
PIV Measurements of Exit Flow Field of Centrifugal Fans with Conditional Sampling
若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
並列摘要
In this research, we have experimented with two centrifugal fans with the same geometrical configuration. These two fans are designed to rotate at different speeds driven with the same voltage. The Particle Image Velocimetry (PIV) method is applied to measure the instantaneous flow fields at the near-exit region. The AMCA 210 wind tunnel is used to find the efficiency and the performance coefficients. The velocity vectors, streamlines, vorticity contours, velocity distributions, flow rate, and performances are also presented and discussed. We find that higher rotation speed yields better efficiency.
延伸閱讀
- CUI, D., & CRAIGHEAD, I. A. (1999). A New Approach to Assess the Quality of Small High-Speed Centrifugal Fans Using Noise Measurement. International Journal of Rotating Machinery, 1999(), 147-153. https://doi.org/10.1155/S1023621X99000135
- Liu, P., Shiomi, N., Kinoue, Y., Jin, Y. Z., & Setoguchi, T. (2012). Effect of Inlet Geometry on Fan Performance and Flow Field in a Half-Ducted Propeller Fan. International Journal of Rotating Machinery, 2012(), 267-275. https://doi.org/10.1155/2012/463585
- ADACHI, T. (2002). Study on the Fluctuating Flow in an Axial Flow Fan (Effects of Operational Conditions and Rotational Speeds). International Journal of Rotating Machinery, 2002(), 193-199. https://doi.org/10.1155/S1023621X02000180
- 林均涵（2012）。The Design and Simulation Analysis of An Inlet Volume Control for Centrifugal Fans〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2012.00369
- Kyparissis, S. D., & Margaris, D. P. (2012). Experimental Investigation and Passive Flow Control of a Cavitating Centrifugal Pump. International Journal of Rotating Machinery, 2012(), 1-8. https://doi.org/10.1155/2012/248082