- 期刊
Fabrication of Composite Wick Structure Heat Spreader
若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
並列摘要
A novel heat spreader was developed with its main cavity of copper tube, where copper mesh and support structure was served as the capillary constructions. The size of the support structure was 73 mm × 48.5 mm × 2.7 mm. Ceramic heater, 30 mm × 30 mm, was used as the heating source with the output power from 10 Watts to 130 Watts, and utilized the heat sink integrated with fan as the cooler. De-ion water was employed as the working fluid with the same filling charge. When heating power was 130 Watts, the temperature of heat source in heat spreader was lower than in copper plate about 4.3°C.
延伸閱讀
- 江長佑（2014）。The Study of PTFE Wick Structure Applied to Flat Plate Loop Heat Pipe〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2014.00390
- 黃承緯（2016）。The Study of PTFE Wick Structure Applied to Flat Plate Loop Heat Pipe〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201601730
- 王鵬凱（2004）。Manufacturing and Investigation of the Polymer Wick Structure Applied to Loop Heat Pipe〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2004.01890
- 陳育堂、謝宏榮、蔡聲鴻、康尚文、許欽淳（2012）。Fabrication of Pressure-Difference Loop Heat Spreader。中華科技大學學報，(52)，33-45。https://doi.org/10.7095/JCUST.201207.0033
- Yi, H. C. (2004). The Investigation of Capillary Wick Structure Fabricated by Sintering Method [master's thesis, Tatung University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0081-0607200917233360