- 期刊
FEASIBILITY ASSESSMENT OF SUBSTITUTING STAINLESS STEEL WITH ALUMINUM ALLOY FOR HYDRAULIC GATE
摘要
In this paper, the feasibility of using aluminum alloy 5083 as a replacement for currently used stainless steel SUS 304L on hydraulic gate is evaluated. Relevant properties of these two materials are compared for use in hydraulic gates. Forty common types of hydraulic gates were analyzed through the finite element program PLAXIS 3D Foundation. It shows the weight for most types of hydraulic gates with aluminum alloy 5083 is in the range of 37.6-45.9% of that of stainless steel SUS 304L. At the same time, the cost of gate manufacturing is reduced 39.6-50.5% and cost of maintanence/operation can be reduced at least 18%. These advantages could make aluminum alloy 5083 a better material than the commonly used stainless steel SUS 304L for hydraulic gates.
延伸閱讀
- 許閔勝（2014）。Study on the feasibility of making stainless steel by rapid prototyping technology〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-2507201415520400
- 黃立仁、張瑞麟、關中皓、施登士（2020）。Evaluation of the Qualities of Weldment in Squeeze Casting and Gravity Casting of Aluminum Alloy。鑄造工程學刊，46(2)，19-34。https://www.airitilibrary.com/Article/Detail?DocID=10116761-202006-202007030024-202007030024-19-34
- Zhu, J. (2006). Behaviour and design of aluminum alloy structural members [doctoral dissertation, The University of Hong Kong]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0029-1812201200012763
- Farahat, A. I. Z. (2013). A New Approach for Improving the Ductility of Austenitic Stainless Steel by Austempering and Alloying with Aluminum. International Journal of Material and Mechanical Engineering, 2(4), 74-79. https://www.airitilibrary.com/Article/Detail?DocID=P20150611007-201311-201510010019-201510010019-74-79
- 林建維（2011）。Formability Study for Stamping Aluminum Alloy Sheets〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2011.00889