- 期刊
聚乙烯/聚酯廢纖混練板之物性研究
The Study on the Blending Board of PE/PET Waste Fiber
若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
並列摘要
In this study, we used the polypropylene (PE) and the polyester (PET) wasted fibers, then mixing and hot pressing the plate. From the results, we found that the best treatment condition in the weight ratio of PE and PET is 3: 1. The best mechanical properties of the treatment conditions are mixing at 1800C, mixing 10 minutes, hot pressing temp at 180oC, hot pressing 15 minutes, and pressing 60 kgf7cm2.
延伸閱讀
- 林佳弘、劉政宏、蘇冠樺（2004）。回收聚酯與聚丙烯不織布之廢邊再製複合板材。華岡紡織期刊，11(2)，107-116。https://www.airitilibrary.com/Article/Detail?DocID=10259678-200406-11-2-107-116-a
- 洪培倫、李貴琪（2002）。聚乙烯複合材料發泡加工之研究。華岡紡織期刊，9(2)，180-187。https://www.airitilibrary.com/Article/Detail?DocID=10259678-200206-9-2-180-187-a
- 田奕紘（2011）。聚乙烯醇/竹炭奈米粒子複合水凝膠材料之製備及性質研究〔碩士論文，中山醫學大學〕。華藝線上圖書館。https://doi.org/10.6834/CSMU.2011.00174
- 曾君傑（2018）。The Properties and Re-Utilization of Recycled Autoclaving Fiber〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201803454
- 廖鑄鋼、張志鵬（2001）。The Research On Application of the Recycling Pulp Fiber Bowl Foam Molded。華岡紡織期刊，8(3)，343-348。https://www.airitilibrary.com/Article/Detail?DocID=10259678-200109-8-3-343-348-a