Tencel纖維經氙弧光照射處理後其表面性質影響之研究

The Research of Tencel Fiber Surface Influence by Xenon Arc Irradiation

鄭敏翊(M. Y. Cheng) ； 潘毅鈞(Y. J. Pan) ； 邢文灝(W. H. Hsing)

《華岡紡織期刊》 14卷4期 (2007/12) Pp. 358-364

https://doi.org/10.29984/JHGT.200712.0007

摘要

本研究是將Tencel纖維經氙弧光照射後，利用纖維強伸度、接觸角、Z電位和染色性質等測試項目，量測出Tencel纖維織物表面及染色，性質變化，並探討其表面性質變化後與染色性質之關聯性。由實驗數據中可以得知，Tencel纖維織物經氙弧光照射後，其表面會產生破壞，並使得纖維表面產生微纖化現象，進而增加纖維之染色吸附性。

關鍵字

Tencel纖維 ； 氙弧光 ； Z電位

並列摘要

In this research, we observed the Tencel fiber after treating xenon arc irradiation by the fiber strength, contact angle, Z potential and dyeing properties to measure the surface and dyeing changed of the Tencel fiber, and also expected to know the relation between these two factors. The results show that the surface of the Tencel fiber has been damaged after treating xenon arc irradiation, and the Fibrillation will on the Tencel fiber surface to increase the dying adsorbent.

並列關鍵字

Tencel fiber ； xenon arc light ； Zeta potential