- 期刊
- OpenAccess
Influence of Composite Restorative Materials Composition on Their Diametral Tensile Strength Values
並列摘要
Purpose: To evaluate and compare the diametral tensile strength (DTS) values of the newly introduced nanofilled composites with the conventional types.Methods: Eight types of dental restorative composites of A3 shade were selected in this study for (DTS) testing: Filtek Supreme XT (3M Espe), Z100 Restorative (3M Espe), Filtek P60 (3M Espe), Filtek Z250 (3M Espe), Premise (Kerr), Point 4(Kerr), Herculite classic (Kerr), and Solitaire (Heraeus-Kulzer). Eight groups of specimens (n = 10) were prepared for diametral tensile strength evaluation. Resin composite specimens were prepared by incremental (two increments) insertion of composite into a circular nickel-chromium split mold of 6 mm in inner diameter and 3 mm in height and cured for 40 seconds for each increment of composite thickness. Specimens were placed into a dark bottle containing distilled water at 37°C for 7 days. DTS tests were performed in a Universal Testing Machine (0.5 mm/min).Results: The results showed that the highest DTS values were found for the Premise composite followed by Point 4, Herculite, Solitaire, Z250, Supreme XT, P60 and Z100 which exhibited the lowest DTS values.Conclusion: The composition of light activated composites is significantly influences their DTS values.
延伸閱讀
- Barrera, G. M., Gencel, O., Campos, C. M., & Santiago, E. V. (2013). Natural, Synthetic, and Recycled Polymers in Composite Materials. International Journal of Polymer Science, 2013(), 225-226. https://doi.org/10.1155/2013/389162
- 潘湧川（2011）。Effect of Material Properties on Mechanical Structure Reliability。品質月刊，47(3)，11-13。https://doi.org/10.29999/QM.201103.0003
- 林宏孟（2023）。Analysis of the tensile strength of composite laminates by using machine learning〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/tku202300031
- 楊秋蘭（2005）。Study on The Drop Test of Composite Material Product〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200500510
- Msallem, Y. A., Kassem, H., Jacquemin, F., & Poitou, A. (2010). Experimental Study of the Induced Residual Stresses During the Manufacturing Process of an Aeronautic Composite Material. Research Journal of Applied Sciences, Engineering and Technology, 2(6), 596-602. https://www.airitilibrary.com/Article/Detail?DocID=20407467-201009-201411050018-201411050018-596-602