An Upper Bound Solution for Closed Die Forging of Sintered Polygon

R. K. Ranjan ； S. Kumar

《淡江理工學刊》 6卷4期 (2003/12) Pp. 207-216

https://doi.org/10.6180/jase.2003.6.4.04

並列摘要

The paper reports on an investigation into the various aspects of closed die cold forging of polygonal powder preforms, which have been compacted and sintered from atomized powder. It is found that for certain dimensional ratios of the preform the die pressure is minimum. An attempt has been made for the determination of the die pressures developed for given geometries of the disc during the closed die forging of polygonal powder preform by using an upper bound approach. Uniform frictional stresses are assumed on top and bottom interfaces and along the interfaces on sides. The feasibility of metal powder preform has been demonstrated by applying an appropriate interfacial friction law and yield criteria. The solution can be extended to closed die forging of any polygonal shape. The results of hexagonal shape is taken for illustration and results so obtained are discussed critically to illustrate the interaction of various process parameters involved and are presented graphically.

並列關鍵字

Closed Die Forging ； Sintering ； Preform ； Interfacial Friction Law