- 期刊
Manufacture and Mechanical Properties of Nanocomposite Laminates
並列摘要
This work mainly aims to manufacture nanocomposite laminates at first. The prepreg AS-4 graphite/PolyEtherEtherKetone laminates were used to make a 16-layered APC-2 laminate of 2 mm thick via curing the modified diaphragm. The nanoparticles of Silica (SiO2) were uniformly spread on the specific interfaces totally about 1-3% by weight of a laminate by sol-gel method. Second, by the results of mechanical testing we found that the optimal content of nanoparticles is 1% of weight percentage, and the ultimate strength increases with 10% and the corresponding stiffness increases with 22% in the quasi-isotropic nanocomposite laminates. At elevated temperature, the ultimate strength and the stiffness of the mechanical properties drop slightly below 75℃. and degrade highly at 150℃.
延伸閱讀
- Kumbhakar, P., Ray, S. S., & Stepanov, A. L. (2014). Optical Properties of Nanoparticles and Nanocomposites. Journal of Nanomaterials, 2014(), 444-445-056. https://doi.org/10.1155/2014/181365
- Hoang, T. T. (2014). The Study on Mechanical Properties of Composited Material Produced with Nanoparticle and Glass Fiber [master's thesis, National Formosa University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0028-1601201411385200
- Mago, G., Kalyon, D. M., Jana, S. C., & Fisher, F. T. (2010). Polymer Nanocomposite Processing, Characterization, and Applications. Journal of Nanomaterials, 2010(), 284-285. https://doi.org/10.1155/2010/325807
- Zou, G., Luo, H., Sun, B., Jain, M., & Peng, H. (2011). Nanocomposites. Journal of Nanotechnology, 2011(), 398-399. https://doi.org/10.1155/2011/870829
- 李振緯（2015）。Mechanical Properties of Nanodiamond/Epoxy Composites〔碩士論文，國立清華大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0016-0312201510243277