- 期刊
The Characterization and Fabrication of Pyroelectric Infrared Sensor
並列摘要
The pyroelectric infrared (PIR) sensor with a calcium-modified lead titanate Pb(subscript 1-x)Ca(subscript x)TiO3 thin film with x=0.3 [PCT(30)] thin film have been successfully fabricated. A RF planar magnetron sputter was used to deposit PCT(30) thin film. A perovskite thin film can be obtained. From the properties measurement we can obtain the remanent polarization Pr=25.3 μc/cm^2 and coercive electric field Ec=52.65 KV/cm. The pyroelectric coefficient was measured as a function of temperature which was 4.13×10^(-4)C/m^2 K at 300 degree C. For the PIR performance measurement, the voltage response of the single PIR sensor is 723.5 VW^(-1) and the specific detectivity is 8.28×10^6 cmW^(-1) at 0.3 Hz. In addition, a 2-D 8×8 element PIR sensor array is finished with fabricated PIR sensors.
被引用紀錄
延伸閱讀
- Rahman, M. M. U., Adalian, D., & Scherer, A. (2015). Fabrication of Patterned Integrated Electrochemical Sensors. Journal of Nanotechnology, 2015(), 130-142. https://doi.org/10.1155/2015/467190
- Liu, Y. C. (2014). Design and Fabrication of Near-Infrared Broadband Micro-Light Source [master's thesis, National Tsing Hua University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0016-2912201413555836
- Rahmoun, M., Hachami, K., Touil, A., Bellach, B., Bailich, M., & Merdani, A. (2011). New Thermoelectric Sensor Adapted to Realize an Infrared Radiations Detector. Active and Passive Electronic Components, 2011(), 103-106. https://doi.org/10.1155/2011/708361
- 林嘉緯（2020）。Design and Fabrication of Human Infrared Sensors〔碩士論文，國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST202000200
- 李奕賢（2018）。Design and Implementation of Non-Dispersive Infrared Gas Sensor〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201804258