透過您的圖書館登入
IP:3.142.96.146
  • 期刊

手術室應用六標準差改善流程時間之效益

Effect of Using Six Sigma in Improving Surgery Time in Operation Room

摘要


This study evaluates the difference in service time before and after the implementation of the six sigma initiative in the operation rooms (OR). Nursing staff in OR used the structured data collection forms to record data from six processes check points for surgical patients in a medical center during the enrollment period. Patients were assigned to three groups based on their staying time in OR (<=120, 121-240, >241 minutes). This study enrolled 1,692 patients in the baseline group (from March 25, 2005 to May 15, 2005) and 1,692 patients in the post-test group (from June 27, 2005 to August 7, 2005). The differences in service efficiency were compared using the t-test and the chi-square test. The analyses demonstrate that three surgical groups according to staying time achieved reductions of 3.43, 4.77, and 12.98 minutes in OR (p<0.05). Moreover, turnaround time was reduced by 6.76, 5.3, and 7.02 minutes (p<0.05), respectively, and employee overtime was reduced by 6.01, 10.07, and 20 minutes, respectively (p<0.05). The study supports that the six sigma technique can effectively reduce patient stay in OR, improve turnaround time of OR, and can significantly reduce staff overtime. This study provides empirical results for use by managers in peer hospitals, surgical departments, and for administrative purposes.

並列摘要


This study evaluates the difference in service time before and after the implementation of the six sigma initiative in the operation rooms (OR). Nursing staff in OR used the structured data collection forms to record data from six processes check points for surgical patients in a medical center during the enrollment period. Patients were assigned to three groups based on their staying time in OR (<=120, 121-240, >241 minutes). This study enrolled 1,692 patients in the baseline group (from March 25, 2005 to May 15, 2005) and 1,692 patients in the post-test group (from June 27, 2005 to August 7, 2005). The differences in service efficiency were compared using the t-test and the chi-square test. The analyses demonstrate that three surgical groups according to staying time achieved reductions of 3.43, 4.77, and 12.98 minutes in OR (p<0.05). Moreover, turnaround time was reduced by 6.76, 5.3, and 7.02 minutes (p<0.05), respectively, and employee overtime was reduced by 6.01, 10.07, and 20 minutes, respectively (p<0.05). The study supports that the six sigma technique can effectively reduce patient stay in OR, improve turnaround time of OR, and can significantly reduce staff overtime. This study provides empirical results for use by managers in peer hospitals, surgical departments, and for administrative purposes.

並列關鍵字

Six sigma operation time service efficiency

參考文獻


古雪鈴(2003)。以品管手法降低手術延遲開始發生比率之研究。醫院。36(3),1-10。
吳醒生(1988)。影響三軍總醫院常見疾病住院日因素之研究(碩士論文)。國防醫學院。
林川雄(1993)。開心手術成本分析(碩士論文)。國立台灣大學。
林玉茹(2000)。教學醫院內外婦兒科醫師工作負荷之研究(碩士論文)。國立陽明大學。
林衍訓(1998)。應用模擬技術於手術室管理與評估-以某醫學中心爲例(碩士論文)。國立台灣大學。

被引用紀錄


黃建誌(2014)。醫院資材庫標準作業流程修訂對績效改善之影響〔碩士論文,義守大學〕。華藝線上圖書館。https://doi.org/10.6343/ISU.2014.00144
洪芳明(2015)。以DMAIC方法於門診智慧系統導入前後之探討 —以A醫學中心為例〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2015.11138
林禹丞(2015)。運用六標準差探討如何降低生鮮冷藏物流作業流程耗損率─以國內某生鮮物流中心為例〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2015.10317
毛小薇(2011)。某醫學中心全面檢驗自動化合作OT案例研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2011.10036

延伸閱讀