透過您的圖書館登入
IP:18.222.120.133
  • 期刊
  • OpenAccess

Antimicrobial Air Filter Fabrication Using a Continuous High-Throughput Aerosol-Based Process

並列摘要


A continuous high-throughput aerosol-based method for fabrication of antimicrobial air filters using natural antimicrobial nanoparticles was developed. We used the nebulization and electrospray methods for deposition of nanosized antimicrobial substances on pristine filter media. The roll-to-roll process was introduced for high-throughput fabrication of antimicrobial filters, and electrospray generation and dispersion equipment were used for high performance. The present method covers a filter area of 4500 mm^2 at one time with uniform deposition. The characteristics of the airborne particles generated by nebulization and the electrospray method were evaluated using a scanning mobility particle analyzer (SMPS) and scanning electron microscopy (SEM). Furthermore, filter performance, such as the pressure drop and antimicrobial efficiency, was examined. The pressure drop of the antimicrobial filter showed a general increasing trend with amount of deposited antimicrobial particles. When 2.64 and 3.52 μg mm^(-2) of antimicrobial particles were loaded on pristine filter media, the measured antimicrobial efficiency of the filter was over 99.5% based on a 24-h contact time. This study provides useful information for the development of a high-throughput production process for antimicrobial air filtration systems.

被引用紀錄


黃璿宬(2011)。溶膠凝膠法製備摻雜銪、釤之鍶矽酸鹽螢光體發光特性研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2011.00666
林鈺庭(2014)。研製水平及垂直電場驅動的膽固醇液晶顯示元件及光電特性研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-3007201418170600

延伸閱讀