透過您的圖書館登入
IP:18.222.184.122
  • 期刊
  • OpenAccess

Comparing the Exponentiated and Generalized Modified Weibull Distributions

並列摘要


In recent years, many modifications of the Weibull distribution have been proposed. Some of these modifications have a large number of parameters and so their real benefits over simpler modifications are questionable. Here, we use two data sets with modified unimodal (unimodal followed by increasing) hazard function for comparing the exponentiated Weibull and generalized modified Weibull distributions. We find no evidence that the generalized modified Weibull distribution can provide a better fit than the exponentiated Weibull distribution for data sets exhibiting the modified unimodal hazard function. In a related issue, we consider Carrasco et al. (2008), a widely cited paper, proposing the generalized modified Weibull distribution, and illustrating two real data applications. We point out that some of the results in both real data applications in Carrasco et al. (2008) are incorrect.

被引用紀錄


江曉均(2014)。摩擦攪拌銲接鋁/銅異質金屬之組織解析與銲接可靠性研究〔碩士論文,國立虎尾科技大學〕。華藝線上圖書館。https://doi.org/10.6827/NFU.2014.00260
謝丞堯(2016)。摩擦攪拌點銲Mg-Al/Mg-Li異質鎂合金之接合強度與破壞行為探討〔碩士論文,國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-2907201614223400

延伸閱讀