導入設計草圖於Solidworks建模之研究

A Study on Applying Design Drafts to Establish a 3D Model with Solidworks Software

陳俊興(Jyun-Sing Chen)

《建國科大學報》 29卷4期 (2010/07) Pp. 81-96

https://doi.org/10.6995/JCTU.201007.0081

摘要

手繪雖然是創作者心中最直接的顯像，也是最簡而易便的創作技法；但是電腦軟體的應用已逐步的興替傳統的設計進程，然而迄今，手繪仍然相當普遍的廣為應用。探討手繪表現及創造意念融入電繪迅速確實的效益，發展出符合實況需求之產品設計進程即是本研究所追求的動機與目的。於本研究中，將設計之概念性草圖導入於Solidworks，讓產品在建模過程中得以依循其路徑描繪成型；且在結果中發現，此創新的應用做法不僅讓產品形態比例不易失真，並能有效的提高2D草繪轉成3D實體的效率。

關鍵字

手繪 ； 電繪 ； 產品設計 ； Solidworks

並列摘要

Hand drawing had been long as a most convenient ways to express the designer,s creative thoughts of a design; it is still true to this date, however, computer sortware ”Solidworks” has been introduced to the area of model construction works, with its advantage of fast and precision as its advantageous point.
In this study, the researcher aims to establish steps for construction a 3D model from the drafts applying ”Solidworks”.
The results of this study, it has been proved that applying ”Solidworks” following the steps in constructing a model, it was not only time saving of efficiency for the work but also establishing a solid model of the final shape could be carried out with satisfactory and success.

並列關鍵字

hand-drawing ； computer graphics ； product design ； Solidworks