- 期刊
Evaluation of Polyphenylene Sulfide and Steel Fibers on Mechanical Properties of Pervious Concrete Pavement
並列摘要
Strength is the primary concern for Portland cement pervious concrete (PCPC) designs. Since PCPC has a high void ratio (often without fine aggregate due to the permeability requirement), compressive and tensile strengths tend to be lower than those of conventional concrete pavements. In this experimental study, PCPC mixes made with steel fibers and polyphenylene sulfide (PPS) fibers and various amounts of sand were evaluated. Mechanical properties, porosity, and permeability of the PCPC were tested. The results pointed out adding fibers to the mixes increased the concrete strength as well as void content. It is noteworthy to mention that PPS fibers performed better than steel fibers. Addition of a small amount of fine sand (approximate 7 % by weight of total aggregate) to the mixes with PPS fibers significantly improved the concrete strength.
延伸閱讀
- 沈家弘（2006）。Investigation of fiber-reinforced unsaturated polyester composites〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2006.00024
- 李伯恩（2022）。Influence and Cost-Effectiveness of Hybrid Cementitious Materials on Chloride Permeation in Concrete〔碩士論文，國立宜蘭大學〕。華藝線上圖書館。https://doi.org/10.6820/niu202200210
- 陳彥睿（2006）。Study and Application of Toughness and Energy Dissipation Behaviors of Reactive Powder Concrete Composite Plate〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2006.02340
- Xing, M. L., He, R., Chen, S. F., & Li, Y. P. (2013). Mechanical Properties and Impermeability of High Performance Cementitious Composite Reinforced with Polyethylene Fibers. International Journal of Pavement Research and Technology, 6(3), 239-242. https://doi.org/10.6135/ijprt.org.tw/2013.6(3).239
- 簡思維（2019）。Study on the Influence of Cement-free Matrix Composites on Mechanical Properties and Durability of Pervious Concrete〔碩士論文，國立宜蘭大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0046-3008201902053200