- 期刊
- OpenAccess
Surface Roughness Effects on Discharge Coefficient of Broad Crested Weir
並列摘要
The aim of this study is to investigate the effects of surface roughness sizes on the discharge coefficient for a broad crested weirs. For this purpose, three models having different lengths of broad crested weirs were tested in a horizontal flume. In each model, the surface was roughed four times. Experimental results of all models showed that the logical negative effect of roughness increased on the discharge (Q) for different values of length. The performance of broad crested weir improved with decrease ratio of roughness to the weir height (Ks/P) and with the increase of the total Head to the Length (H/L). An empirical equation was obtained to estimate the variation of discharge coefficient C_d in terms total head to length ratio, with total head to roughness ratio.
延伸閱讀
- 楊逸琦（2015）。Effect of surface roughness on contact angle hysteresis〔碩士論文，國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-0412201512043709
- 鍾佑政、李興軍、莊書豪、洪偉家（2008）。The Effects of Surface Roughness on the Characteristics of Surface Pressure of NACA 0015 Airfoil。航空太空及民航學刊.系列B，40(2)，113-122。https://doi.org/10.6124/JAAA.200810_40(2).06
- 胡琮普（2012）。The effect of surface roughness elements on the atmospheric boundary layer〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2012.00499
- 蔡清標、張百欣（1996）。Effect on Surface Roughness to Toe Scouring of a Slope Seawall。台灣水利，44(4)，47-60。https://www.airitilibrary.com/Article/Detail?DocID=P20220602001-N202301030044-00005
- Yang, Y., Li, L., Feng, B., & Kang, Y. H. (2016). Surface Roughness Influence on MFL Inspection for Surface Defect. 先進工程學刊, 11(2), 63-66. https://www.airitilibrary.com/Article/Detail?DocID=a0000255-201604-201605100025-201605100025-63-66