- 期刊
- OpenAccess
Shape Verification of Fused Deposition Modelling 3D Prints
並列摘要
In this article, the shape of fused deposition modelling (FDM) 3D printed testing objects is verified with 3D scanning technique. Leapfrog's Creatr is used as a manufacturing device. The whole process of a materialization is explained-from preparation of a model to preparation of a printer. The study is meant to evaluate dimensional errors of printed parts and to give some advices on how to minimize them.
延伸閱讀
- Lin, T. Y. (2010). Combining Shape Prior with Non-Rigid SfM for Recovering Specific 3D Deformable Surfaces [master's thesis, National Tsing Hua University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0016-1901201111413052
- 林坤誼（2017）。An Analysis of Applying 3D Printing Technique in STEM Project-based Learning Activity。中等教育，68(2)，83-88。https://doi.org/10.6249/SE.2017.68.2.06
- 曾祥瑞（2022）。A Development of Digital Light Processing 3D Printing for Ceramic Separation Membranes〔碩士論文，國立宜蘭大學〕。華藝線上圖書館。https://doi.org/10.6820/niu202200230
- Hsu, C. C. (2019). Structure design and stress analysis of 3D printing scaffold [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU201903516
- Tseng, P. K. (2017). Hybrid Additive and Subtractive 3D Printing Process for Multi-Heterogeneous Objects Fabrication [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU201703385