- 期刊
- OpenAccess
Optimization of Sintering Parameters of Submicron Cobalt Metal Powder Using Taguchi Method
並列摘要
The sintering studies of submicron cobalt powder have been presented in this paper. Cobalt powder prepared by thermal decomposition route of cobalt oxalate (CoC_2O_4.2H_2O) has been characterized prior to sintering. In this investigation, the influence of various parameters affecting the sintering process has been analyzed and the optimum processing parameters for maximum sintered density have been determined by using Taguchi method. The parameters considered are the decomposition temperature, compaction pressure and sintering temperature. The effects of these input parameters on the response (percentage sintered density) have been critically analyzed using Taguchi method. It has been found that the sintering temperature is the most important process parameter affecting the sintered density. Sintered density near to theoretical density was obtained when the process parameters were set at their optimum values.
延伸閱讀
- Huang, K. H. (2018). Synthesis and Study of Spiropyran Copolymer for Metal Ion Detection in Semi-Aqueous Media [master's thesis, National Chiao Tung University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0030-0205201911200077
- Chiang, K. T., Chang, F. M., Liu, N. M., & Chou, C. C. (2015). Modeling and Analysis of Machinability Evaluation in the Powder Mixed Electrical Discharge Machining of Cobalt-Bonded Tungsten Carbide. 修平學報, (31), 1-28. https://www.airitilibrary.com/Article/Detail?DocID=18172954-201510-201602250008-201602250008-1-28
- Yang, T. Y. (2019). Investigation on Sintering and Electrical Conductivity of Ceria-based Materials by Addition of Multiple Metal Oxides [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU201901627
- 王覺寬、賴等參、林天柱、邱俊賢、楊哲睿、徐明生（2005）。Optimization of Metal Powder Production by Gas Atomization Processes with Internal-Mixing Mechanism。中國航空太空學會學刊，37(2)，153-161。https://doi.org/10.6124/TAASRC.200506_37(2).06
- Shiau, Y. F. (2014). Optimization of Microwave Heating Pretreatment onBiomass Material Using Taguchi Method [doctoral dissertation, National Taipei University of Technology]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0006-0508201413581200