- 期刊
- OpenAccess
Contact Characteristics of Metallic Materials in Conditions of Heavy Loading by Friction or by Electric Current
並列摘要
Friction of composites having composition TiC+metal was realized at pressure more 100 MPa in lubricant medium. Sliding electric contact of metal materials was carried out at contact current density higher 100 A/cm^2 without lubricant. It was shown that these loading parameters cause a friction surface wear which increases at increasing alloying atoms quantity or number of phases in the initial structure of material.
延伸閱讀
- 潘湧川（2011）。Effect of Material Properties on Mechanical Structure Reliability。品質月刊，47(3)，11-13。https://doi.org/10.29999/QM.201103.0003
- Yang, H. H., Yang, C. M., Wong, C. H., Hsieh, C. C., Mi, H. H., & Chi, T. W. (2001). Emission and Dry Deposition Characteristics of Metal Elements from Engineering Construction Sites. Aerosol and Air Quality Research, 1(1), 69-81. https://www.airitilibrary.com/Article/Detail?DocID=a0000100-200106-1-1-69-81-a
- 賴峯民、蔡佳吟、籃峻祥、楊宸貿（2011）。Surface Mechanical Properties of Plastic Industrial Components for Electroless Coating Technology。科學與工程技術期刊，7(4)，19-34。https://doi.org/10.7117/JSET.201112.0020
- 賴哲毅（2015）。The Energy Absorption Characterization of Metal and Composite Material〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2015.00778
- 許仁勇、郭士綱、吳坤陽（2014）。A Study of Examining the Compaction Ability of Insulating Coatings on Iron Powder Using an Electrochemical Method。防蝕工程，28(4)，197-202。https://doi.org/10.6376/JCCE.201412_28(4).0004