- 期刊
Minimizing Stress Shielding and Cement Damage in Cemented Femoral Component of a Hip Prosthesis through Computational Design Optimization
延伸閱讀
- 陳俊步（2009）。The Biomechanical Study of a Modified Wire-locked Screw and Plate Fixator for Femoral Periprosthetic Fracture After Total Hip Arthroplasty〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200900047
- Wada, H., Mishima, H., Sugaya, H., Nishino, T., & Yamazaki, M. (2016). Three-Dimensional Analysis of the Contact Pattern between the Cortical Bone and Femoral Prosthesis after Cementless Total Hip Arthroplasty. Advances in Orthopedics, 2016(), 116-122. https://doi.org/10.1155/2016/8052380
- Kreuzer, S. W., Pourmoghaddam, A., Leffers, K. J., Johnson, C. W., & Dettmer, M. (2016). Computed Tomography Analysis of Postsurgery Femoral Component Rotation Based on a Force Sensing Device Method versus Hypothetical Rotational Alignment Based on Anatomical Landmark Methods: A Pilot Study. Advances in Orthopedics, 2016(), 53-60. https://doi.org/10.1155/2016/4961846
- Tai, C. L. (2005). The Effect of Geometry and Fixation Modes of Total Hip Prosthesis on the Stress Shielding of Proximal Femur in Total Hip Arthroplasty [doctoral dissertation, Chung Yuan Christian University]. Airiti Library. https://doi.org/10.6840/cycu200500134
- Tai, C. L., Chen, W. P., Lee, M. S., Lee, P. C., & Shih, C. H. (2004). Comparison of Stress Shielding between Straight and Curved Stems in Cementless Total Hip Arthroplasty-An in vitro Experimental Study. Journal of Medical and Biological Engineering, 24(4), 177-181. https://www.airitilibrary.com/Article/Detail?DocID=16090985-200412-24-4-177-181-a