工業用燃煤鍋爐效率計算方法分析及效率標準之訂定

The analysis of boiler thermal efficiency and standards for industrial coal-fired boilers

沈韋成(Wei-Cheng Shen)

指導教授 ： 馬小康

國立臺灣大學/工學院/機械工程學研究所/碩士(2010年)

https://doi.org/10.6342/NTU.2010.01404

摘要

隨著京都議定書的簽訂以及能源意識的抬頭，節能減排已成為全球重視的問題，目前台灣僅訂定燃油及燃氣鍋爐效率標準，並未針對燃煤鍋爐訂定效率標準，本研究之目的在訂定工業用水管式燃煤鍋爐效率標準建議值，裝置容量範圍為5t/h至30t/h，並且針對國家標準(CNS2141)鍋爐熱效率計算方法之出入熱法以及熱損失法公式作分析與比較，找出適合現有量測技術的計算方式，配合實測的15座燃煤鍋爐，建立一新參數OT，可利用OT估計鍋爐效率，並利用Visual Basic撰寫一鍋爐效率計算程式，提供更簡便的鍋爐效率計算方式。參考日本、加拿大、英國、西班牙、奧地利及中國的鍋爐效率標準，評估工業用水管式燃煤鍋爐的操作條件建議值，訂定對日後新設鍋爐的效率標準建議值。

關鍵字

熱損失法 ； 出入熱法 ； 鍋爐效率標準 ； 燃煤鍋爐 ； 鏈條爐排

並列摘要

The purpose of this study is to establish the boiler efficiency standards for water tube coal-fired boilers. At present, Taiwan only has boiler efficiency standards for liquid fuel-fired and gas-fired boiler, but not for the coal-fired boiler. Compared with the boiler efficiency standards calculation method from Japan, Canada, UK, Spain, Austria and China, the heat lost method is proposed to be the CNS2141 method to calculate the water tube coal-fired boiler efficiency. After measuring fifteen coal-fired boilers, a new standards of efficiency is proposed for new water tube boilers. We set out the operating conditions and recommended efficiency standards for new water tube coal-fired boilers.

並列關鍵字

Boiler efficiency ； Water tube coal-fired boiler ； Heat lost method ； Direct method

參考文獻

[3] S. Yeh, E. S. Rubin, “A centurial history of technological change and learning curves for pulverized coal-fired utility boilers”, Energy, Vol. 32 pp. 1996-2005, 2007.

[6] J. Bugge, S. Kjae, R. Blum, “High-efficiency coal-fired power plants development and perspectives”, Energy, Vol.31 pp. 1437-1445, 2006.

[12] S. A. Lloyd, F. J. Weinberg, “A burner for mixtures of very low heat content”, Nature, Vol. 5470 pp. 47-49, 1974.

[13] 趙依心，“高溫觸媒熱再循環燃燒器實作及其應用”，中央大學機械工程研究所碩士論文，2006

[21] A.M. Abdallah, A.L. Ismail, “Saving energy lost from steam boiler vessels” Renewable Energy, Vol. 23 pp. 537-550, 2001.