無線傳輸模組在船舶運動量測之應用研究

Application of Wireless Transmission Module to the Measurement of Ship Motions

邱意明(Yi-Ming Chiu)

指導教授 ： 邱逢琛

國立臺灣大學/工學院/工程科學及海洋工程學研究所/碩士(2009年)

https://doi.org/10.6342/NTU.2009.01198

摘要

本文主要在探討船舶運動量測系統使用無線傳輸模組的可行性。說明無線傳輸模組與感測器的搭配設計，以及無線通訊模式的建立。利用撰寫C程式語言的方式，控制微控制器MSP430F1611作為無線傳輸模組的設計架構。以星狀拓撲作為船舶運動量測的無線通訊架構。藉由無線傳輸方法的設計，改善以往船舶運動量測上，有線佈置系統對船舶運作的干擾。

關鍵字

船舶運動 ； 無線傳輸 ； 微控制器

並列摘要

The purpose of this research is to investigate the feasibility of application of wireless transmission module to the measurement of ship motions. This research includes collocation and design of the wireless transmission module and the sensors, as well as the establishment of wireless communication mode. C programming language is used to control the micro-controller MSP430F1611, and the design of structure in wireless transmission module. Star topology is used as the frame of wireless communication to the measurement of ship motions. The wired measurement system might disturb the operation of crew. By the design of wireless transmission methods improve the problem just mentioned before.

並列關鍵字

ship motion ； wireless transmission ； micro-controller

參考文獻

[5] STMicroelectronic, L7800 SERIES Datasheet, STMicroelectronic, 2003.

[1] Forng-Chen Chiu, Sao-Wei Liu, Wen-Chuan Tiao and Jenhwa Guo, “Development of a Simple System to Measure 5 DOF Ship Motions in a Seaway,” The Eighth International Conference on Fast Sea Transportation (FAST 2005), Saint-Pertersburg, Russia, 2005/6.

[2] Texas Instrument, ”MSP430x1xx Family User’s Guide,” technical report, Texas Instrument, 2006.

[3] Uniband Electronic Corporation, ”U-Force Module User Manual,” Uniband Electronic Corporation, 2008.

[4] Texas Instrument, MSP430F1611 Datasheet, Texas Instrument, 2006.