透過您的圖書館登入
IP:3.145.81.232
  • 學位論文

即時視訊處理架構之軟硬體共同設計

HW/SW Co-Design of Real-Time Video Processing

指導教授 : 王勝德

摘要


在本論文中提出了一個模組化、可重複使用、功能強大的即時視訊處理平台。此平台以Altera的Cyclone II FPGA與Terasic的DE2-70開發版為基礎,配備了500萬像素CMOS數位攝影機與800 x 400 LCD觸控式螢幕模組。整個系統由μC/OS-II與Nios II構成,使用多主從與共享記體方式,搭配Pipeline Bridge與SDRAM雙通道完成整個架構,支援軟硬體共同設計,經過模擬與合成結果,證明了此架構能達到即時視訊處理的嚴格要求。

關鍵字

軟硬體 即時 視訊

並列摘要


In this paper, a modular, configurable and versatile platform for real-time video processing is presented. The hardware platform is based on the Altera Cyclone II FPGA and Terasic DE2-70 development board which is equipped with 500M pixel CMOS digital camera and 800x480 resolution LCD touch panel module. The platform supports simultaneous HW/SW co-design and partitioning. The whole of system was made under µC/OS-II and was performed on the Nios II soft core processor, constructed by Multi-Master , Shared Memory, Pipeline Bridge, and Dual-Channel SDRAM architecture. Simulation and Synthesis results are presented and prove that our video system respect the real-time constraint.

並列關鍵字

Co-Design Video

參考文獻


[1] 李世安 (2008). 及時目標影像追蹤之SOPC設計. 電機工程學系, 私立淡江大學. 博士論文.
[2] A. Ben Atitallah, P. K., F. ghozzi, P. Nouel, N. Masmoudi, Ph, Marchengay (2008). Real-Time Video System Design Based on the NIOS II Processor and µCLinux.
[3] Altera Corp. (2004). Automotive Graphics Controller Reference Design.
[4] 陳泳男 (2007). 使用FPGA及CMOS Image Sensor來達成即時機器視覺.
[5] Altera Corp. (2008). Avalon-MM Interface Specification.

被引用紀錄


黃志勝(2010)。基於FPGA的嵌入式視覺伺服系統之設計與實現〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2010.02923
李兆棠(2012)。應用FPGA於即時手勢辨識系統之設計與實作〔博士論文,國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-0608201210054700

延伸閱讀