透過您的圖書館登入
IP:18.220.90.54
  • 學位論文

燈具高低調整與風機尾翼設計應用於植物工廠

Application of Adjustable Light Mounting Fixture and Tail-Wing Design of Wind Turbine in Plant Factory

指導教授 : 黃振康

摘要


本研究旨在探討燈具高低調整與風機尾翼設計應用於植物工廠之效果,以期改善環控農業長期以來一直為人詬病的操作成本過高的問題,在不犧牲人工光源光場品質的同時,提升人工光源之利用率,達到節能之目的。研究中將嘗試以加裝反光片的方式來提高光源反射率,增加植株接收到光的比例,以及以高低可調式燈具隨株高自動調整光源高度,將光源做更有效的利用。實驗結果顯示,人工光源距離影響光場強度甚鉅,在無加裝反光片下,當人工光源距離由30 cm 下降至10 cm 時,光量由23.46 提升到了40.83

並列摘要


The purpose of this study is to probe into the effect of the application of adjustable light mounting fixture and tail-wing design of wind turbine in plant factory in order to solve the problem of controlled environment agriculture which has long been criticized for high-cost, and to achieve the purpose of energy conservation without sacrificing the quality of artificial light sources. The reflectance of the light source has been improved by the reflector to increase the proportion of the light received by the plant, and to make the light source more effective by adjustable light mounting fixture which adjusts the height of the light source automatically. The result shows that the light intensity is increased by the height of the light mounting fixture, which is increased from 23.46

參考文獻


14. 姚銘輝。2011。光度單位轉換問題之探討。出自〝第85期農業試驗所技術服務〞,26-29。台中:農業試驗所。
19. 劉立仁。2010。小型水平軸式風力發電機空氣動力特性探討。碩士論文。台北:淡江大學航空太空工程學系。
20. 劉冠伶。2011。植物工廠量產低硝酸鹽萵苣之研究。碩士論文。台北:國立台灣大學生物產業機電工程學研究所。
21. 顏炳郎、范睿豪、顧偉揚、黃振康。2012。小型風力發電機於植物工廠的應用。台灣農學會報13(5): 471-486。
8. 田雲生、張金元、戴振洋、蔡正宏。2013。輪轉吊盤式立體栽培架之研發應用。出自〝農機自動化及設施專輯〞,4-6。台中:台中區農業改良場。

被引用紀錄


劉郁緯、黃振康(2020)。計算流體力學模擬應用於植物工廠通風燈具的設計台灣農學會報21(1),14-33。https://doi.org/10.6730/JAAT.202010_21(1).0002

延伸閱讀