透過您的圖書館登入
IP:18.191.68.50
  • 學位論文

調頻調光式電子安定器之製作及測試

Fabrication and Testing of a Frequency Modulated Dimming Electronic Ballast

指導教授 : 陳德玉

摘要


近年來,具有調光功能的螢光燈安定器已成為具節能意識的消費者的一個重要採購特徵。在此論文,一個簡要回顧了標準電子安定器電路和各種調光系統報告。實驗原型的製作是採用SGS-Thomson公司的積體電路L6574 。電源電路配置是一個半橋並聯諧振換流器而頻率調變技術是用於調光功能。提供設計細節和實驗波形及證明調光能力。

並列摘要


In recent years, the dimming capability of a fluorescent ballast has become an important feature for the energy-conscious consumers. In this thesis, a brief review was given to standard electronic ballast circuits and the various dimming schemes reported. An experimental prototype was fabricated based on SGS-Thomson Company's integrated circuit L6574. The power circuit configuration used was a half-bridge parallel resonant inverter and frequency- modulation scheme was used for dimming capability. Design details and experimental waveforms were given and dimming capability was demonstrated.

參考文獻


[1] E.E. Hammer and C. Ferreira, "F40 Fluorescent Lamp Considerations for Operating at High Frequency", Journal of the Illuminating Engineering Society, Vol. 15, No. 1, pp.63-74 Fall 1985
[4] Naoki Onishi, Tsuomu Shiomi, Akio Okude and Tokushi Yamauchi, "A Fluorescent Lamp Model for High Frequency Wide Range Dimming Electronic Ballast Simulation", IEEE APEC conference record 1997, pp.641-647
[5] Marian K. Kazimierczuk and Wojciech Szaraniec, "Electronic Ballast for Fluorescent Lamps", IEEE Transactions on Power Electronics, Vol. 8, No. 4, October 1993
[6] T. Ribarich, J. Ribarich, "A New Procedure for High-Frequency Electronic Ballast Design", IEEE Transactions on Industry Applications, Vol. 37, No. 1, January/February 2001
[10] 王明山,“數位調光電子式安定器的設計與研製”,私立中原大學電機工程學研究所碩士學位論文,2004年6月

延伸閱讀